RMC
-
20 Foot Conduit
Wheatland is now offering 20 foot nominal lengths of Electrical Metallic Tubing (EMT) in Trade Sizes 1/2 through 4, and Rigid Metal Conduit (RMC) in Trade Sizes 2 through 6, to reduce the number of joints and associated labor in assembling steel raceways. -
Galvanized Steel Rigid Metal Conduit (RMC)
Wheatland’s Galvanized steel Rigid Metal Conduit (RMC) is manufactured in accordance with the latest specifications and standards of ANSI® C80.1, UL-6, and federal specification WW-C-581. The pitch of RMC threads conforms to ANSI/ASME B1.20.1.
EMT
-
Color Check™ Color Coded EMT Conduit
Wheatland’s Color Check™, color-coded EMT steel conduit, gives you on-the-spot identification of your critical and emergency electrical systems. EMT is dual labeled, certified by CSA® and listed by UL®. It is manufactured in accordance with ANSI® C80.3, UL-6 and federal specifications WW-C-581. -
20 Foot Conduit
Wheatland is now offering 20 foot nominal lengths of Electrical Metallic Tubing (EMT) in Trade Sizes 1/2 through 4, and Rigid Metal Conduit (RMC) in Trade Sizes 2 through 6, to reduce the number of joints and associated labor in assembling steel raceways.
-
Electrical Metallic Tubing (EMT) - Steel Elbows Submittal Sheet
Electrical Metallic Tubing (EMT) - Steel Elbows Conforms With: ANSI – American National Standard for Steel Electrical
Metallic Tubing, (EMT) ANSI, C80.3; UL Standard for Electrical Metallic Tubing – Steel, UL797; National Electrical Code® 2008 Article 358; Federal Specifi cation WW-C-563 -
Fas Trak Electrical Metallic Tubing (EMT)
Steel Fas Trak Electrical Metallic Tubing (EMT) has the thinnest wall of all of the metallic raceways and still provides considerable physical protection for conductors and cables in all applications except those requiring protection from severe physical damage. Manufactured in accordance with ANSI® C80.3, UL 797, and federal specification WW-C-563.
Intermediate Metal Conduit
-
Steel Intermediate Metal Conduit (IMC)
IMC is a lighter weight alternative to RMC conduit. IMC has a reduced wall thickness compared to RMC and weighs approximately 33% less, but still provides excellent physical protection for cable and conductors. Manufactured to ANSI® C80.6, UL 1242, and federal specification WW-C-581.
Aluminum Rigid Conduit
-
Aluminum Rigid Conduit
Aluminum Rigid Metal Conduit is about one-third the weight of steel RMC. Threaded on both ends, Wheatland’s Aluminum Rigid Metal Conduit (RMC) is manufactured in accordance with the latest specifications and standards of ANSI® C80.5, UL 6A, and federal specification WW-C-581. The pitch of aluminum conduit threads conforms to ANSI/ASME B1.20.1.
Elbows, Couplings and Nipples
-
Wheatland Elbows, Coupling and Nipples
Wheatland manufacturers a full line of complementary tubular fittings — nipples, elbows, couplings and running thread — made from the same materials as our raceways: aluminum and steel.
Canadian
-
Electrical Conduit Products (Canadian)
Canadian EMT is manufactured on modern electric resistance weld mills and galvanized in-line. Special coatings are then applied to ease the pulling of wires and to inhibit white rust and storage stain. -
Elbows, Coupling and Nipples (Canadian)
Wheatland manufacturers a full line of complementary tubular fittings — nipples, elbows, couplings and running thread — made from the same materials as our raceways: aluminum and steel.
Electric Conduit Technical Reference Documents
- CSI Master Format 2011 - Listing of all Wheatland Products
-
Conduit Tubing 2011 National Electrical Code Reference
The three NEC® 2011 Articles contained in this brochure specifically address the installation of electrical steel raceways produced by Wheatland. They represent only a small segment of the code which may be amended by other Articles or Sections, depending on the installation.
MasterFormat ®2011 of Wheatland pipe and tubing product applications